| General and Gaming > Classic Video Games |
| APF M1000 |
| << < (2/3) > >> |
| htimreimer:
can you count how many pin that the controller port has also the way the controllers are connected is just like odyssey 2 |
| sessiz:
I count 8 pins. The first pic up there is of the controller ports. |
| pceslayer:
Awesome! When you crack open the controllers take some pics too! I'm betting on a cold solder joint or a bad connection. Try swapping the two controllers or leaving only one connected. |
| htimreimer:
--- Quote from: pceslayer on June 28, 2012, 02:21:33 pm ---I'm betting on a cold solder joint or a bad connection. Try swapping the two controllers or leaving only one connected. --- End quote --- i agree also dose any know how hard it would be to add a Solder Cup D-Sub Connector 9 pin like this http://www.l-com.com/item.aspx?id=3254 then he can use a genesis or 2600 controller or any 9 pin controller |
| pceslayer:
--- Quote from: htimreimer on June 28, 2012, 03:25:10 pm --- --- Quote from: pceslayer on June 28, 2012, 02:21:33 pm ---I'm betting on a cold solder joint or a bad connection. Try swapping the two controllers or leaving only one connected. --- End quote --- i agree also dose any know how hard it would be to add a Solder Cup D-Sub Connector 9 pin like this http://www.l-com.com/item.aspx?id=3254 then he can use a genesis or 2600 controller or any 9 pin controller --- End quote --- This all depends on if there is any logic inside of the original controllers. If no then that would be pretty darn simple to add assuming you trace back what wires connect where with a multimeter. |
| Navigation |
| Message Index |
| Next page |
| Previous page |