VGCollect Forum
General and Gaming => Hardware and Tech => Topic started by: htimreimer on March 04, 2012, 04:50:08 pm
-
i have a odyssey 2 game box that has a sticker on the front how do i remove it
-
not ture there is a way to remove it without damaging the box. You could try Goo GOne or the like, but I won't guarantee anything.
-
Depending on how old/crusty the sticker is, use lighter fluid. It will take pretty much any type of sticker or adhesive off.
-
Lighter fluid or rubbing alcohol. If you get some isopropyl alcohol and dab it on most stickers will come off. It evaporates quickly too which helps to not damage the box.
-
Ya I'd go Matt's route before attempting goo gone. That stuff scares me. It took off the paint on an aluminum sheet at work once, when we were trying to remove a decal.
-
I use goo gone exclusively and I haven't had any issue with it on any cart or guide book. You just dab some on the sticker, let it sit for about 15-30 minutes and peel it off. I always take a slightly damp paper towel to wipe away the goo gone after I get the sticker off.
I've never damaged anything with it.
-
I had bought a few CD games on Ebay with some guard thing on it. I used lighter fluid and it took it off.
-
Lighter fluid or isopropyl alcohol are good alternatives. Although like darko I have never had any problems with Goo Gone.
As far as CD games go I haven't found anything that will remove Movie Gallery protective covers. They're usually plastic and nothing is able to penetrate to the adhesive. I wrecked a Mega Man X6 disc trying to remove the blasted thing. Paper Game Exchange labels are easy though.
-
Have you tried heat on those plastic covers? I've never ran into one, so I can't be sure, but a hair dryer on low might work.
-
Thats what mine was ... the protective cover. What I did was get a razor to start getting under it. Once I got enough of the edge around the CD removed, I just peeled it off. Those things are tough as hell and out of 4 disks, not one ripped (they were so tough that one of my disks actually broke in the pulling off process but the stupid guard still didnt rip). Once I got the guard off, I just cleaned the top of the disks.
-
I have used Goo Gone on boxes before. I just slowly peeled the sticker away sooner than I would if it was on a case.
-
Have you used Goo Gone on cart labels? I have a few that need some stickers off, but I'm scared I'll ruin the label.
-
I've used it on SNES and NES cart labels before. As long as you are careful it should be fine. I would try to remove as much of the sticker as possible before applying the googone. Also, I would put some on a paper towel, dab on the googone and then let it sit for about 2 minutes. After that see what you can get off and repeat the process until you're satisfied. This should keep the label intact and enable you to remove the sticker residue.
If it's an N64 game I'd be really careful since the labels don't have the nice shiny layer over the art.
-
I would be scared to try goo gone to remove a sticker on colored cardboard. I personally would try a blow dryer first. If you heat up that glue a little it may peel off easily. On plastic goo gone works great, but I've tried to use it to remove stickers that overlap the labels and had it ruin the label too.
-
For what it's worth I used goo gone to get sticker residue off of a 360 label today, as in the paper, not the plastic :)