Messages

1

Hardware and Tech / Re: SNES 101 , SNES 2 WONT TURN ON

« on: January 24, 2019, 12:54:02 pm »

Thats what i thought but check and when i turn on the SNES on the channel on blue should change so the TV knows something it´s connected , but nothing changed.

An you know why , this thing start to work suddenly well not that suddenly i checked most of the components to see continuity and in the voltage regulator accidentally make a little short and then check but seems fine the VR after that i make a test and the SNES turn on , and everything works like it should , testes with Yoshis Island.

2

Hardware and Tech / Re: SNES 101 , SNES 2 WONT TURN ON

« on: January 20, 2019, 06:44:53 pm »

Ok, yep its the OLD mini, SNES2 , SNES 101 or New-Style Super NES.

I have two AC ADAPTERS

the original Output 10v 850 mA   =Multimeter value 14.4v

generic for SNES/NES Output 9v 850mA =Multimeter value 9.4v

i attached an image on red circle its the dc jack pins i got the same voltage that comes out of the dc adapter if i have the console OFF i f i turn on its downs like 2 vlts

on the green circle its the ON/OFF Switch .   In OFF position i got all the voltage form the DC ADAPTER.  In ON position got .038v

https://imgur.com/a/BG801t0

3

Hardware and Tech / SNES 101 , SNES 2 WONT TURN ON

« on: January 18, 2019, 03:43:34 pm »

i have a SNES 101 ,it wont turn on i check the DC power adapter and shows about 14.5 v , i found another similar for NES/SNES and give me 9.4 v SO I THINK i can use that, then i check continuity on dc jack on SNES and on the solder it receives  THE 9.4 v but then i dont know where to continue verifying.

On classics the pico fuse its the common problem but with this i dunno where the fuse is, well i believe its the white dot next to a voltage regulator (17805).

 And besides that what else to check. .

Any ideas , info would be soooo much apreciated.